ALCOLIN

• Material
• Waterbased

• Flexible at temperatures as low as
• -40°C

• Appearance
• Beige foam
• White, viscous liquid
• Appearance Putty like consistency of various colours
• Appearance Viscous tan liquid, drying to a beige coloured glue line
• Appearance White, trowel-able paste
• Beige trowelable mastic
• Grey metal-coloured thick liquid
• Homogenous non sagging paste
• Imbuia Homogenous non sag paste
• Khaki homogenous non sag paste
• Meranti Homogenous non sag paste
• Oak Homogenous non sag paste
• Off white trowelable paste
• Pale orange foam
• Pine Homogenous non sag paste
• Putty like
• Translucent paste
• Translucent yellow liquid
• Viscous brown liquid drying to a beige rigid film
• Viscous white liquid

• Appearance
• Appearance Clear, colourless liquid
• Appearance Homogenous non sag paste in grey or white
• Black Homogenous non sagging paste
• Bronze homogenous non sagging paste
• Clear homogenous non sagging paste
• Clear liquid
• Translucent paste
• Translucent yellow liquid
• White homogenous non sagging paste

• Appearance and Type
• Synthetic Rubber spray

• Apperance
• Powder coated
• Black tough elastic tape
• Green tough elastic tape
• Translucent yellow liquid
• White tough elastic tape

• Application
• Interior and exterior
• Light industry, household furniture, and construction industry.
• Temperature +5 to +35 °C
• All purpose
• Bonds cornices, polystyrene cornices, plaster, painted or cement surfaces
• Building
• Building and DIY industry
• Carpet and Vinyl
• Cornice Adhesive
• Electrical, Automotive plumbing and industrial
• Excellent for exterior
• Fills, seals and Insulates
• General and DIY
• General application
• General purpose
• Heavy-duty paint and coating remover
• Household and handcraft uses
• Ideal for household repairs, DIY tasks and handicrafts
• Ideal for indoor furniture, model building and craftwork
• Interior and exteror
• Interior Woodwork
• Joint sealing
• Light duty application onto internal and sheltered external walls and floors.
• Light duty on interior walls and floors.
• Multi-purpose
• Multi-Purpose
• Non-conductive sealer
• Tiling
• Wall & floor tiles
• Woodwork

• Application
• Distribution of caulk
• Interior and exterior applications
• Wood

• Application temperature
• 18°C to 35°C
• 10 - 30°C

• Application temperature
• Min. -5°C to max. +35°C
• +5 to +30 °C
• Application temperature 15°C to 30°C

• Application temperature range
• Min. -5°C to max. +30°C

• Application temperature range
• Min. 0°C to max. 50°C

• Applications
• Surfaces exposed to damp, wet or underwater conditions.

• Base/Type
• Ethyl cyanoacrylate

• Blade Length
• Clear

• Can be cut
• 2 -5 hours

• Catridges sizes
• 260ml to 315m

• Chemical resistance
• Excellent. Resists Petrol and oil

• Color
• Light grey
• Super white

• Colour
• Cherry
• Imbuia
• Mahogany
• Natural
• Oak
• Pine
• Sapele
• White

• Colour
• Clear
• White

• Colour – Prior to curing
• White inner / light blue outer
• White Outer / Khaki Inner

• Colour – Prior to mixing
• Blue Outer / White Inner

• Colour – Upon curing
• Off White
• Off White
• White

• Consistency
• Trowelable mastic

• Coverage
• Approx. 2.8m2 at 1mm thickness
• Approximately 2m2 per litre (double sided application.)
• 100ml per 200 grams
• 12 metres
• 2m2 per litre (double sided application.)

• Coverage
• 12 mtr
• 1Sqm/Lt

• Coverage – 280ml cartridge
• 11 metres (5mm x 5mm joint)

• Coverage for 280ml cartridge
• 11 metres (5mm x 5mm joint)

• Coverage/kg
• ± 1m²/kg using a 6x6x6 notched trowel. The estimated coverage depends on the nature of the surface

• Coverage/kg
• Approximately 0.8m2 using a 6x6x6mm notched trowel

• Coverage/L
• ±4m²/L depending on the porosity of the substrate and thickness of the adhesive film

• Curing time
• Approx. 24 hours
• 24 hrs

• Curing time
• Approx. 24 hours

• Curing time Approx
• per 3-4mm

• Curing time Approximately
• Approximately 24hours per 2mm

• Density
• 1.3 g/cm3 at 23°C
• Approximately 1.06g/cm³
• Approximately 1.0g/cm3
• Approx. 1.38 g/cm3
• Approximately 1.10g/cm
• Approximately 1.14g/cm³
• Density (g/cm³) 1.1

• Density
• 25-30kg/m³
• (g/cm³) 1.6
• 0.17 to 0.30Density (g/cm³)
• Approx. 1.65 ± 0.03 g/cm3
• Approximately 0.85g/cm³
• Approximately 1.10
• Approximately 1.6g/cm³
• Density Approx. 2.0 g/cm³
• Density Approximately 1.36g/cm³

• Density 1.62 g/cm3 at 23°C
• Density 1.62 g/cm3 at 23°C

• Density Approx
• Approx. 1.03 g/cm3

• Density Approximately 1.06g/cm³
• Approximately 1.06g/cm³

• Drying time
• 10 minutes to 4 hours, depending on thickness of application, temperature, humidity and surface to be treated

• Drying Time
• 2 - 5 minutes at room temperature

• Final cure
• 60Minutes

• Final setting time
• 2 ½ - 3 hours at 20°C and 50% humidity

• Final setting time
• Approximately 24 hours at 25°C and 50% humidity

• Floor coverage
• 2m²/kg

• Full cure
• 24 hours
• After 24 hours

• Full Cure
• 2 - 3 Hrs

• Full cure time
• 24 Hrs

• Gap filling properties
• Less than 0.05 mm

• Hardens in
• 10 Mins

• Hardens in
• 10 Mins
• 40 - 60 Mins

• Heat resistance
• up to +120°C

• Heat resistance
• 90°C
• Approximately 80°c
• Can go up to +120°C.
• Can go up to +150°C.

• Heat Resistance
• Up to 50°C

• Heat resistance
• 149°C
• up to 260°C

• Heat resistant
• Can withstand up to 149°C.

• Initial setting time
• ± 35 minutes at 20°C and 50% humidity

• Joint size
• 2-10mm

• Maximum bond strength (
• Achieved after 12 hours

• Minimum Application Temperature
• 4°C

• Minimum application temperature
• Minimum application temperature 4°C

• Oil resistance
• Very good resistance to motor oils

• Operating temperatures
• -40°C to +120°C

• Operating Temperatures
• -40°C to 120°C

• pH
• Approx. 7

• PH
• 7

• PH
• Approximately 6.3
• PH Approximately 4.0

• Service Temperature
• 5-80 °C

• Service temperature
• Between -5°C and +110°C

• Service temperature range
• Min. -10°C to Max. 80°C
• Min. –20°C to max. +80°C
• Min. -10°C to max. 70°C
• Service temperature range -5°C to + 60°C

• Service temperature range
• Min. -5°C to max. +50°C
• Min. -10°C to max. +80°C
• Min. -10°C to max. 80°C

• Set time
• ±24 hours

• Setting time
• 10 to 60 seconds – dependent on nature of substrate, temperature, and humidity
• 24 hours, depending on temperature

• Setting time
• Approx. 24 hours depending on substrate porosity and environmental conditions
• Approx. 2mm per 24 hours

• Size
• 280ml

• Size
• 3 meters
• 3m

• Softening time
• 10-20 mins on enamels

• Solids
• Approx. 80%

• Solvent
• Methylene chloride

• Spread Rate
• 100-250g/m2
• 60-250g/m2

• Spread rate
• 100-250g/m2

• Spread rate
• 60-250g/m2

• Tack off time
• Approx. 30 - 45 minutes depending on site conditions: temperature, humidity and surfaces to be treated

• Temperature resistance
• -40 to +90 ºC

• Temperature resistance
• up to 260°C

• Temperature Resistant
• up to 90°C

• Touch dry
• 1 hour

• Touch dry time
• Approx. 30 minutes

• Type
• Epoxy mastic
• Acrylic
• Cement-based
• Expanding polyurethane foam
• Fibreglass reinforced polymer compound
• Metal
• Neoprene / polychloroprene adhesive
• One-part acetoxy-curing silicone
• Polymer compound
• Polyurethane foam
• Polyurethane, moisture curing
• Polyvinyl acetate based
• Self-fusing silicone rubber tape
• Single component cyanoacrlyate based
• Solvented, rubber based sealant,
• Synthetic rubber-based
• Type Natural polymer based
• Water based
• Water-based synthetic ter-polymer

• Type
• Crosslinking polyvinyl acetate adhesive

• Type
• Nitrocellulose polymer
• Polyvinyl acetate adhesive
• Type Natural polymer based

• Type Water based
• Water based

• Usage
• 1 cartridge will do 6-8 meters of cornice

• Viscosity Paste
• Paste

• Wall coverage
• 4m²/kg

• Water resistance
• Excellent
• Good
• Waterproof

• Water resistance
• Waterproof
• Good
• Waterproof

• Water Resistance
• Good