Search
US Dollar
Home Improvements & Construction
ERA PVC SOLVENT WELD 50mm 45deg WASTE PLAIN BEND
PKE45400
- Solvent weld joints
- UV resistant
- Ideal for use on direct sunlight
$0.25
ERA PVC SOLVENT WELD 50mm 87.5deg WASTE ACCESS BEND
SPE79229
- Solvent weld joints
- UV resistant
- Ideal for use on direct sunlight
- Light and easy to handle
$0.65
ERA PVC SOLVENT WELD 50mm 87.5deg WASTE PLAIN BEND
BVL03519
- Solvent weld joints
- UV resistant
- Light and easy to handle
$0.39
ERA PVC VMP 75mm FEMALE ADAPTOR
RFG29211
- Chemical and abrasion resistance
- Recyclable, eco-friendly material
- UV resistant
$2.28
ERA PVC VMP 90mm FEMALE ADAPTOR
DTS79476
- Chemical and abrasion resistance
- Recyclable, eco-friendly material
- UV resistant
$2.84
ERA PVC VSP 75mm MALE ADAPTOR
FHO71797
- Chemical and abrasion resistance
- Recyclable, eco-friendly material
- UV resistant
$2.24
ERA PVC VSP 90mm MALE ADAPTOR
DON79923
- Chemical and abrasion resistance
- Recyclable, eco-friendly material
- UV resistant
$3.83
ERA RUBBER RING 110mm SURFACE DOUBLE SOCKET
FAF99627
- UV resistant
- Ideal for use above ground
- Corrosion resistant
$2.98
ERA RUBBER RING 110mm SURFACE ESSENTRICAL REDUCER
HRZ02634
- UV resistant
- Ideal for use above ground
- Corrosion resistant
$1.33
ERA RWG003 110mm GUTTER COUPLING
ZOY38935
- Cost effective
- Water resistant
- PVC is light, therefore easier to install
$0.62
ERA RWG005 GUTTER END CAP LEFT
QBR36200
- Cost effective
- Water resistant
- PVC is light, therefore easier to install
$0.67
ERA RWG006 GUTTER END CAP RIGHT
KGZ14180
- Cost effective
- Water resistant
- PVC is light, therefore easier to install
$0.67
ERA RWG007 GUTTER CLAMP
ZTO95194
- Cost effective
- Water resistant
- PVC is light, therefore easier to install
$0.73
Min:
$0.00
Max:
$1,364.00
$0
$1364
Filter by
Filter by attributes
- Material
- Resolution
- Storage
- Flexible at temperatures as low as
- Bristle Type:
- Finish
- Full strength
- Handle Type:
- Pressure rating
- Scraper Material
- Skin formation
- Smooth, Medium
- Surface Texture
- Type of solvent
- 60% strength in 20 minutes
- Aapplication
- AC
- Acidity
- Adhesion
- Adhesive
- Adhesive
- Adhesive style
- Adhesive will harden fully
- Apllication
- Apllication
- Appearance
- Appearance
- Appearance and Type
- Appearance:
- Appearence
- Apperance
- Apperanvce
- Appication
- Appliation
- Applicable Power
- Applicatio
- Application
- Application
- application
- Application Environment
- Application method
- Application methods
- Application methods
- Application Rate
- Application temperature
- Application temperature
- Application Temperature
- Application temperature range
- Application temperature range
- Application Temperature:
- Application Temperature:
- Application type
- Applications
- Applications
- Applicatiuon
- Applicaton
- Applicattion
- Appliction
- Appllication
- Appplication
- Aux. Supply
- Backing (Material Type)
- Bars
- Base
- Base/Type
- Battery Capacity
- Battery powered
- Battery Type
- Bend option
- Blade
- Blade Length
- Blade material
- Blade size
- Board colour
- Board Colour
- Body Material
- Body material
- Boiling Point
- Boiling Point
- Boiling point
- Boiling point/range
- Bristle
- Bristle material
- Bristle Type
- Bristle type
- Bristle type
- Bristles
- Bristles
- Brush size
- Brush Size
- Brush sizes
- Can be cut
- Cap Colour
- Cap colour
- Capacity
- Capacity
- Catridges sizes
- Charger (Mains Supply)
- Chemical Type
- Class
- Clean Up
- Cleaning
- Cleaning
- Coding Code-hopping
- Cold Resistance
- Collision Sensing
- Color
- Color
- COlor
- Colour
- Colour
- Colour
- Colour – Prior to curing
- Colour – Upon curing
- Colour / Finish
- Colour code
- Colour/Finish
- Colour:
- Compatible Gate Motor
- Complete Curing (20°C):
- Completely dry Time
- Components
- Composition
- Connction type
- Connection
- Connection type
- Connection type
- Connecvtion type
- Consistency
- Contents
- Continous temperature Rating
- Continuous Temperature rating
- Continuous temperature Rating
- Contious temperature rating
- Copper diameter
- Coverage
- Coverage
- Coverage – 280ml cartridge
- Coverage – as coating
- Coverage – as waterproofing system with membrane
- Coverage (280ml cartridge)
- Coverage (280ml catridge)
- Coverage (90ml cartridge)
- Coverage (90ml tube)
- Coverage for 280ml cartridge
- Coverage per box
- Coverage per litre
- Coverage/kg
- Coverage/kg
- Coverage/L
- Cup hook size
- Cure Time
- Curing time
- Curing time
- Curing time Approx
- Curing time Approximately
- Current Consumption
- Current consumption (mains)
- Current consumption (motor at rated load)
- Current Rating
- Cutting Length
- Cutting thickness
- Cutting Thickness
- DC
- Degree of Protection
- Degree of protection
- Density
- Density
- Density
- Density (g/cm³)
- Density @ 20 °C
- Density 1.62 g/cm3 at 23°C
- Density Approx
- Density Approximately 1.06g/cm³
- Density,
- Density:
- DENSİTY: 17±2 kg/m3
- Diameter
- diameter
- Diameter:
- Dimensions
- Disposal
- Drain Connector
- Dry time
- Dry time
- Drying
- Drying
- Drying Time
- Drying time
- Drying Time
- Drying time
- Dust dry
- Duty cycle - Mains present (2,3)
- Dx12V Battery charger current output
- Element rating
- Elongation
- ensile strength (MPa)
- Final setting time
- Final setting time
- Finisg
- Finish
- Finish
- FInish
- FInish
- Finish:
- Finsh
- Flamablity
- Flammable
- Floor coverage
- Floor Tile Coverage
- Form
- Frame
- Frequency
- Frequency stability
- Full cure
- Full Cure
- Full cure time
- Full Cure Time
- Full day (5,6,8)
- Full strength
- Full strength
- Full strength time
- Full tensile strength
- Fuse cut temperature
- Fuse Protection
- Gap filling properties
- Gate length - maximum
- Gate mass - maximum
- Gate speed (varies with load) (4)
- Half day (5,6,8)
- Handle
- Handle material
- Handle Material
- Handle Material
- Handle materiual
- Handle Type
- Handle type
- Handle Type:
- Handle Type: Wood
- Handling bond in 4½ minutes
- Handling bond time
- Hanger plate size
- Hard dry
- Hardens in
- Hardens in
- Health
- Health & Safety
- Heat resistance
- Heat resistance
- Heat resistance
- Heat Resistance
- Heat resistance
- heat resistance
- Heat Resistance
- Heat resistant
- Hole Spacing
- Hook size
- Indoor/outdoor
- Indoor/Outdoor
- Initial boiling point and boiling range:
- Initial setting time
- Inlet diameter
- Inlet Diameter
- Innertank
- Input voltage(1)
- Insulation
- IP Rating
- IP Rating
- Joint size
- Keys
- Laser wave length
- lenghth
- Length
- Length
- Lock System
- Locking System
- Maimum temperature resistance
- Main component
- Main Control Card
- Male iron diameter
- Manual Overide Keys
- Manual Override
- Manual Override Keys
- Materaial
- Material
- Material:
- Materiall
- Materials
- Materials bonded
- Materilal
- Matrial
- Max Working Pressure
- Maximum bond strength (
- Maximum Contineuos heat
- Maximum Continuous high temperature
- maximum door weight
- Maximum door weight
- Maximum number of operations per day
- Maximum Operating Pressure
- Maximum Operating Pressure
- Maximum Operating pressure
- Maximum operating pressure
- Maximum operating pressure
- Maximum operating Pressure
- Maximum Operating pressure
- Maximum Operating Pressure
- Maximum operating temperature
- Maximum Operation Pressure
- Maximum temperature
- Maximum Temperature resistance
- Maximum temperature resistance
- Maximum working pressure
- Maximum working pressure
- Maximum Working Pressure
- Maximum working temperature
- Measurement accuracy
- Measurements
- Melting point/freezing point:
- Minimum Application Temperature
- Minimum application temperature
- Minimum Operating Voltage
- Minimum operating voltage
- Mix ratio
- Mixage
- Motor power supply
- Motor push force - rated
- Motor push force - starting
- Motor Voltage
- Motor voltage
- Mounting Type:
- Nominal Pressue
- Nominal pressure
- Nominal Pressure
- Nominal voltage
- Norminal pressure
- Number of Keys
- Number of hooks
- Number of keys
- Number of Keys
- Oil resistance
- Onboard receiver type
- Operating current
- Operating Pressure
- Operating Temperation
- Operating temperature
- Operating temperature
- Operating Temperature
- Operating Temperature
- Operating temperature range
- Operating Temperatures
- Operating temperatures
- Operating temperaturte
- Operation Temperature
- Operations whilst in Battery backup mode with 7.2Ah Battery
- Outer tank
- Outlet
- Overcoating Time
- Overcoating Time
- Padlock size
- Padlock size
- Paint
- Paint Brush Size
- Paint type
- Pan Outlet
- Pane
- Pane
- Panels
- Panels
- Panes
- Perfomance
- Permeability In Water
- pH
- PH
- PH
- pH:
- Pin Combination
- Pin Combinations
- Pipe size
- Plating
- Power Protection
- Power rating
- Pressing and Clamping time
- Pressure
- Pressure
- Pressure rating
- Pressure rating kPa
- Product code
- Product Colour
- Product colour
- Product Quality
- Quality
- Quantity
- Quantity
- Range
- Rated current
- Rating
- Ready-to-cut time
- Receiver code storage capacity
- Receiver code storage capacity7
- Receiver Enclosure
- Receiver frequency
- Recoat
- Recoat
- Recoat time
- Recoat Time
- Recoating
- Recoating
- Recoating time
- Recoating Time
- Recoating Time
- Recoating time
- Recommended Door Width
- Recommended Gap
- Recommended gap
- Recommended maximum gap
- Recovery time tp full thickness
- Roll Length
- Roller size
- Safety
- Scraper Material
- Scraper Size
- Sections
- Security
- Security level
- Security Level
- Security level
- security level
- Service Temperature
- Service Temperature
- Service temperature range
- Service temperature range
- Set time
- Set Time
- Set Time
- Sets hard
- Setting time
- Setting time
- Setting/drying time
- Settting time
- Shackle Material
- Shape
- Shape
- Shape:
- Shelf life
- Shelf Life
- Shelf life
- Side
- Side
- Size
- Size
- SIze
- size
- Sizes
- Skin Formation
- Skin formation
- Softening time
- Solids
- Solids 100%
- Solubility in Water
- Solubility in water
- Solubility In Water
- Solvent
- Specification
- Spread Rate
- Spread rate
- Spread rate
- Springs size
- State
- Storage
- Storage Temperatue
- Storage Temperature
- Storage temperature
- Style:
- Supply Voltage
- Surface dry
- Surface Texture
- Surface Type
- Sze
- Tack free time:
- Tack free time:
- Tack off time
- Tank Internal Material
- Tank Internal Material
- Tape adhesive
- Tape measure length
- Tape size
- Tape size
- Temperature
- Temperature
- Temperature Range
- Temperature resistance
- Temperature Resistance
- Temperature resistance
- Temperature Resistance
- Temperature resistance up to 180°C
- Temperature resistance
- Temperature Resistance:
- Temperature Resistant
- Tempereature
- Tensile Strength
- Thickness
- Thickness
- Thining
- Thinner
- Thinner
- Thinning
- Thinning
- THinning
- Time to full cure
- Time to initial set
- Time to initial set Min
- Tintable
- Top speed
- Touch dry
- Touch Dry
- Touch dry time
- Touch dry time
- Touch drying
- Tubes
- Type
- Type
- Type
- Type Neutral cure
- Type of Application
- Type of Paint
- Type of Tiles
- Type of tiles
- Type Water based
- Usage
- Use
- Use
- UV resistance
- Vials
- Viscosity
- Viscosity @ 25℃ 500
- Viscosity Paste
- Voltage
- Voltage
- Wall coverage
- Wall Tile Coverage
- Water resistance
- Water resistance
- Water Resistance
- Weight class
- White point:
- Will set in about 14 minutes.
- Work height
- Working Pressure
- Working temperature
